How to Install a Kitchen Sink Faucet ~ Kitchen Faucet

install 1
Step 1: Shut off hot and cold water at the faucet stop valves. Put together the actual areas of the actual outdoor patio dish which include the actual external installation openings inside your kitchen sink outdoor patio (if you don't tend to be setting up the two-handle tap, or even installation the actual tap straight to the actual counter top, as with a good undermount kitchen sink scenario). Give a diamond ring associated with plumber's putty within the groove about the bottom from the bottom dish.

install 2 Step 2: Set the base plate onto the sink flange so it's properly aimed using the predrilled openings within the flange. Through beneath, tighten up the actual side nut products which safe the actual outdoor patio dish towards the kitchen sink outdoor patio.

install 3 Step 3: Retract the pullout hose by drawing this away with the tap entire body before fitted at the conclusion from the hose pipe is actually get rid of using the base from the threaded tap shank. Place the actual shank and also the provide pipes lower with the the surface of the outdoor patio dish.

install 4 Step 4: Slip the mounting nut and washer within the free ends from the supply pipes and pullout hose pipe, then line the enthusiast onto the actual threaded tap shank. Hands tighten. Tighten the actual retainer screws having a screwdriver in order to secure the actual faucet.

install 5 Step 5: Slide the hose weight on to the pullout hose pipe (the actual weight helps maintain the hose pipe from tangling also it makes it simpler to retract).

install 6 Step 6: Connect the end of the pullout tube to the outlet port on the faucet body using a quick connector fitting.

install 7 Step 7: Hook up the water supply tubes towards the faucet inlets. Make certain the outlines are lengthy enough to achieve the provide risers without having stretching or even kinking.

install 8 Step 8: Connect the supply lines to the supply risers at the stop valves. Make sure to get the hot lines and cold lines attached correctly.

install 9 Step 9: Attach the spray headtowards the end from the pullout hose pipe and change the fitted to secure the bond. Turn upon water provide and check. Tip: Take away the aerator within the tip from the spray mind and operate hot as well as cold drinking water to get rid of out any kind of debris.